Quanzhou Changjiang Engineering Machinery Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Qinghai Zhang
  • Company Name : Quanzhou Changjiang Engineering Machinery Co., Ltd.
  • Tel : 86-595-22069599
  • Fax : 86-595-22058599
  • Address : Fujian,Quanzhou,Shuangyang Economic Development Zone,Luojiang Area,Quanzhou,Fujian,China
  • Country/Region : China
  • Zip : 362000

Products List
sell undercarriage parts bulldozer segment group sprocket for D6D,D50,D7G,T120,T140

sell undercarriage parts bulldozer segment group sprocket for D6D,D50,D7G,T120,T140

1.Found in 1993 2.Complete Forging 3.About 30 days lead time. 4.1500-2000 Hours guarantee 5.ISO9001:2008 1.Product Specification  Material45MnQualityHeat-treated,HRC49-56,Depth 5-8mmColorYellow or...
Daewoo DH55 track roller,upper roller,bottom roller for excavator

Daewoo DH55 track roller,upper roller,bottom roller for excavator

1.Found in 1993 2.Fine Forging 3.About 30 days lead time. 4.1500-2000 Hours guarantee 5.ISO9001:2008 1.Product Specification Material50MnQualityHeat-treated,HRC49-56,Depth 5-8mmColorYellow or BlackTechniqueForgingFinishingSmoothCerificateISO9002MOQUnlimited  Our...
idler assy,idler roller,idler group

idler assy,idler roller,idler group

our idlers are made by Mn45 steel,the hardness is HRC49--56,the depth is 5--8mm Our idlers have important technical function because these parts must support strongly all tracks without any waving or unbalance.It also must help the track drive smooth with the strong body made with...
sprocket rim,segments,sprocket wheel

sprocket rim,segments,sprocket wheel

Sprocket and Segment used for bulldozer and excavator Our sprocket and segment have a higher resistance against fatigue and have a longer service life.this is possible when all teeth of sprocket and segment are heated at the same time and have a uniform the tooth tip. ...
Sell Hitachi EX400 track roller high wear resistance bottom roller lower roller under roller

Sell Hitachi EX400 track roller high wear resistance bottom roller lower roller under roller

1.Found in 1993 2.Complete Forging 3.About 30 days lead time. 4.1500-2000 Hours guarantee 5.ISO9001:2008 1.Product Specification  Material50MnQualityHeat-treated,HRC49-56,Depth 5-8mmColorYellow or...
Track roller bottom roller lower roller for excavator D6D

Track roller bottom roller lower roller for excavator D6D

1.Found in 1993 2.Fine Forging 3.About 30 days lead time. 4.1500-2000 Hours guarantee 5.ISO9001:2008 1.Product Specification Material50MnQualityHeat-treated,HRC49-56,Depth 5-8mmColorYellow or BlackTechniqueForging/CastingFinishingSmoothCerificateISO9002MOQUnlimitedOur company...



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.